Page 5 of 7

Posted: Mon Oct 27, 2008 2:45 pm
by smitty
Mace Man wrote:That is a good idea until different pin locations are installed then the spoke points to the wrong location. Harvey is working on concrete markers to bury by the baskets to point people in the right direction. here is a map that need a few tweaks just on hole lengths.

True, then you just use a different color. Then you have the Blue course and the Red Course.

Cement markers will work fine also.

Arrows on trees not a bad idea either. Over time it will be easy as the path should get worn into the ground.


Cannot wait to check it out.

Posted: Mon Oct 27, 2008 3:01 pm
by Schoen-hopper
Is there a park bulletin board you can use? If so, I'd just get one of those brochure boxes and put some printed maps in there.

Painting spokes is okay, but there aren't really enough spokes to get an accurate direction. Plus, are you pointing to the path to get to the next tee or the actual direction?

Buried bricks sounds good. How about doing that for tees in case some flags disappear?

Posted: Mon Oct 27, 2008 6:15 pm
by Mace Man
Schoen-hopper wrote:Is there a park bulletin board you can use? If so, I'd just get one of those brochure boxes and put some printed maps in there.
The parks dept are working on a board, so for now.

Posted: Sat Jan 17, 2009 5:18 pm
by MOthrows
Haven't posted on this one for awhile, but we had a great workday this morning. Thanks to everyone that showed up. We are pushing past 400 man hours put in out there!

Re: Thomas Park Workday

Posted: Sun Aug 02, 2009 1:44 am
by one19
Are there more workdays to come? I'm definitely willing to come and do what i can to help labor-wise etc.
What more needs doing, and how can it get done?
Has whoever decides where the long & short tees go - decided where they might go?

Is the tournament planned for mid-August still on?

Re: Thomas Park Workday

Posted: Sun Aug 02, 2009 8:02 am
by Mace Man
one19 wrote:Are there more workdays to come? I'm definitely willing to come and do what i can to help labor-wise etc.
What more needs doing, and how can it get done?
Has whoever decides where the long & short tees go - decided where they might go?

Is the tournament planned for mid-August still on?
This next week there will afew coming up. The tee sign posts will be going this week. Not sure yet on the details but will post back. What works best for you Days or nights

Tournament is on!!!!

Re: Thomas Park Workday

Posted: Fri Nov 20, 2009 7:16 am
by Mace Man
We need to get go out and discuss the alt pin placement to make final decisions so we can get the signs printed up before the end of the year. If we don't do this we will lose those funds. I say an hour or so before league on sunday. Any thoughts??

Re: Thomas Park Workday

Posted: Fri Nov 20, 2009 12:06 pm
by sb23
i agree w u mace on sunday b4 league. i will be out if weather permits me 2.

Re: Thomas Park Workday

Posted: Sat Nov 21, 2009 9:52 am
by disc golf superhero
I'm out of town but yes meet before league.

Re: Thomas Park Workday

Posted: Wed Apr 07, 2010 6:10 pm
by Austin
We need to start doing work days again.

Re: Thomas Park Workday

Posted: Thu Apr 08, 2010 9:06 am
by pschmidt
When are they pouring tee pads?
When are we spraying for poison ivy? (Harvey got the stuff?)
When are we spraying for ticks? (Mace get that other stuff?)
When are we digging alternate pins?

I'm free after work on Wednesdays and Thursdays. Also, the 24th.

Re: Thomas Park Workday

Posted: Sat Apr 24, 2010 7:51 pm
by MOthrows
Kill all the poison ivy!

Re: Thomas Park Workday

Posted: Sun Apr 25, 2010 4:09 pm
by disc golf superhero
Build a defining pond on hole 2.

Re: Thomas Park Workday

Posted: Tue May 04, 2010 9:21 pm
by one19
.

So as I understand it, the first scheduled workday is this Thursday, May 6th, 6pm; earlier if one can make it.

With Number 9 being the hole of focus.

.

Re: Thomas Park Workday

Posted: Tue May 04, 2010 9:50 pm
by pschmidt
Poison ivy should be the focus. I took this picture the other day....

Image

Not really... It's not really a picture of Thomas but hole #14 could get this bad if we don't spray soon. I hate that stuff!!