Disc golf equipment- discs, accessories, targets, etc.
Notorious ROG
Posts: 206 Joined: Tue Aug 03, 2004 8:53 amLocation: OKC or WIC depends on day of week
Post
by Notorious ROG Fri May 25, 2007 9:30 pm
I used to be able to remove hot stamps with nail polish remover or acetone, but on star plastic it isn't working so well, any ideas?
pironix
Posts: 773 Joined: Wed May 31, 2006 11:42 pmLocation: Wichita
Post
by pironix Fri May 25, 2007 10:22 pm
I'm not sure if it will do much better since acetone isn't working, but rubbing alcohol is worth a shot...
pironix
Posts: 773 Joined: Wed May 31, 2006 11:42 pmLocation: Wichita
Post
by pironix Fri May 25, 2007 10:39 pm
You must be Snoop_Rogg ON PDGA forums....
Mace Man
Posts: 1368 Joined: Mon Aug 02, 2004 11:10 pmLocation: Salina
Post
by Mace Man Sat May 26, 2007 12:26 am
goof off
Bangrrr
Posts: 941 Joined: Sat Oct 21, 2006 7:02 pmLocation: LA. Lawrence Area that is....
Post
by Bangrrr Sat May 26, 2007 12:40 am
I know that Methyl Ethyl Keytone works well on ESP plastic........
Throw some D's on it!!!!!!!!!!!!!!!!
Notorious ROG
Posts: 206 Joined: Tue Aug 03, 2004 8:53 amLocation: OKC or WIC depends on day of week
Post
by Notorious ROG Sat May 26, 2007 10:10 am
Mace is Da Man!
Anakha
Posts: 499 Joined: Mon Jul 25, 2005 6:43 pmLocation: topeka
Contact:
Post
by Anakha Tue Jun 05, 2007 5:05 pm
Warning.
Goof off will eat through old Pro D plastic...found that out after it ruined two of my old Magnets.
MOthrows
Posts: 1300 Joined: Mon Aug 01, 2005 11:13 pmLocation: Yes it's important
Post
by MOthrows Tue Jun 12, 2007 6:54 pm
Mace Man wrote: goof off
Where do you get it?
Anita
Posts: 267 Joined: Tue Aug 03, 2004 9:48 amLocation: Lincoln, NE
Post
by Anita Tue Jun 12, 2007 8:53 pm
The hardware store.
Sandman
Posts: 1545 Joined: Wed Aug 04, 2004 10:03 pmLocation: iCT
Contact:
Post
by Sandman Wed Jun 13, 2007 11:32 am
Anakha wrote: Warning.
Goof off will eat through old Pro D plastic...found that out after it ruined two of my old Magnets.
I wouldnt use it to clean out your acrylic water-bearing smoking utensil either
.......cracks exactly like tempered glass
superq
Posts: 999 Joined: Thu Mar 03, 2005 8:51 pmLocation: in the yard putting
Post
by superq Sat Jun 16, 2007 2:50 pm
I use acetone on all plastic the only trouble I have is with the ESP, I pour it over the stamp until all the color is run off then wipe the foil off no problem, you must not be using enough, try it over a plate or something so you can re-use the acetone and they should come right off.
opie
Posts: 495 Joined: Thu Aug 12, 2004 3:50 pmLocation: Atlantis
Contact:
Post
by opie Mon Sep 10, 2007 7:58 pm
You might as well try gas and a match.
You don't use them anyway
My people skills are just fine, it's my tolerance for idiots that need work.
.......cracks exactly like tempered glass 
